-40%
Ejector for Dillon XL650 XL750 Hit Factor (Ejec)
Ejector for Dillon XL650 XL750 Hit Factor (Ejec)
Ejector for Dillon XL650 XL750 Hit Factor (Ejec)
Ejector for Dillon XL650 XL750 Hit Factor (Ejec)

Ejector for Dillon XL650 XL750 Hit Factor (Ejec)

$ 7.37

  • Ammunition Type: N/A
  • Brand: Hit Factor Supply, LLC
  • Capacity: N/A
  • Country/Region of Manufacture: United States
  • Gauge/Caliber: N/A
  • Item Height: .4375"
  • Item Length: 2.125"
  • Item Weight: 1.5 ounce
  • Item Width: 1"
  • MPN: Ejec
  • Model: Dillon XL 750 XL 650
  • Press Type: Progressive
  • Type: Ejector
  • UPC: 195893801961
  • gtin13: 195893801961

Description

This ejector replaces the wire ejector on Dillon XL750 or XL650 presses. Please watch the video in this listing. It contains the setup and adjustment information for your kit. The video covers installation for all variations of our kit, some chapters may not apply to the kit purchased. Instructions are not supplied with the kit. It works great with our Shellplate Bearing Kit for Dillon XL650 XL750 Hit Factor (750) . If you don't have one, you'll need one for this ejector to work. Tuning the ejector wire is the biggest complaint people have about using a bearing kit. Our Ejector solves that problem and the inherent issue with the case binding. To install - lift off the wire ejector, push this onto the shellplate bolt, aim it at the chute, and tighten the set screw. The ejector is a zinc die casting, this is the same manufacturing technology used for many parts on your Dillon press. It will look right at home. The ejector has a pleasing heft to it when you pick it up. It is extremely durable, unlike the plastic printed ejectors. This Ejector is made in Michigan, U.S.A. Our bearing kits were featured in the Nov/Dec 2011 issue of Front Sight magazine. The best solution for your 750 or 650 is our Ultimate Bearing Kit for Dillon 750 . Please visit our eBay Store to view all of our kits.