Description

Dillon case feeder conversion for LEE App Press Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] u Updated auction. I can't ad variations to my OTHER existing auction, so I'm starting THIS new one. I'll phase out the older version. The Standard kit (spring ID is .518") works with all Rifle or Pistol brass with a Diameter less than that of 44mag. From 9mm, 223 to 308 and 30-06 The Magnum kit works with all Rifle or Pistol brass that is 44mag, 45 long colt or smaller in diameter. Which is almost everything most people mass load for. The ID of the spring is ~.550"... absolute max size.. never tested anything that large. Magnum kit uses different spring (larger stainless) and different adapters. This is an adapter set so you can run your Dillon XL series case feeder to feed the Lee APP. There are 2 lower adapters that fit 3 of the 4 tubes included with the App kit. You get the case feeder to spring adapter, the spring, 2 lower adapters and the 1" Round base adapter. You can find 1" wooden dowels at hardware stores, which make for great poles. Special thanks to S.H. for his help and pictures used above. Dillon case feeder conversion for LEE App Press Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo]