Description
Hello, fellow reloader! This case lubrication adapter is a direct replacement for the stock connector for Dillon 750 650 presses. THIS ADAPTER WAS CUSTOM MADE FOR THE CUSTOMER WHO NEEDED .45-70 CALIBER. NOT good for .308 - it is larger. It was also made to make sure .338 Lapua brass passes through fine. Inner chamber dimeter is set to 15.7mm. Please confirm before ordering which exact caliber you require. It will be printed for the order. Adapter was recently reworked and improved for handgun caliber also - added a removable insert to block the pistol brass from falling out - it can be removed to process taller rifle brass. Design of wheels was improved to use less oil. I included short video demonstrating the steps of setting it up, it is self-explanatory. Install adapter and rubber band to make sure both wheels are pressed in - use rubber band in that position while resizing brass, for other operations rest it on the tube freely so wheels would not be pressed in and rub at cases transferring lubricant. Add lubricant of your choice - do not add too much, just enough for wheels to touch it. Adapter pockets are made to be large enough to supply oil to about of 100 cases in average. Less is more, do not overfill. Rubber band does not require too much tension - refer to the picture of how it is suggested to setup, with one string of the band used only. It may differ upon the type and size of the rubber band, of course. Offered in either Black or Blue color. Feel free to contact me with any questions you may have. No returns, USPS shipment to continental USA only.