Description
Hello, fellow reloader! This case lubrication adapter is a direct replacement for a .223 caliber kit case feeder tube connector on Dillon 750/650 presses. Adapter was recently reworked and improved to also handle handgun caliber 9mm - I added a removable insert to block the pistol brass from falling out - it can be removed to process taller rifle brass. Design of wheels was improved to use less oil. It was designed it to solve a stuck cases problem once and for all, after dealing with that issue multiple times either due to defects on older cases or insufficient amount of lube spray applied prior to resizing/depriming cycle. With this adapter in place the issue is guaranteed not to happen again. I included a short video demonstrating the steps of setting it up, it is quite self-explanatory. Put adapter on, add a bit of a lubricant, and it 'just works'. Install rubber band with just enough pressure to make sure both wheels are pressed in but do not obstruct cases from dropping down freely. Add lubricant of your choice - do not add too much, just enough for wheels to touch it. Adapter pockets are made to be large enough to supply oil to about of 200 cases in average. Less is more, do not overfill. Offered in either Black or Blue color. Feel free to contact me with any questions you may have. No returns, USPS shipment to continental USA only.