-40%
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua
3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua

3D PRINTED BRASS CASE-FEEDER Like DILLON. Improved Updated For 338 Lapua

$ 99.8

  • Ammunition Type: All
  • Brand: Unbranded
  • Country/Region of Manufacture: United States
  • Gauge/Caliber: All
  • Model: XLarge CSF
  • Press Type: Progressive
  • Type: CaseFeeder

Description

For about a fraction of the costs Mr. Bullet, LEE, Dillon and other name brand feeders Here is a 3D printed case feeder ... design to work just like the big boys and has the same capacity and its FANTASTIC! This uses a variable speed motor, your choice of standard or high torque motors. You can dump a lot of brass cases in a cup at a time and it will stop automatically when case tube fills up using a finger switch , It automatically starts filling the tube when it gets low. Your choice of motors: High torque specs: YWBL-WH 12V 10RPM 10Watts Brush Motor Standard specs: JGY-370 12V 10RPM 2Watts Brush Motor Mounting options are 3/4 inch steel tube. Can be used with automatic progressive presses such as RCBS and the Dillon 650/750 as well as Hornady and the LEE Loadmaster presses. Very popular with the Lee App presses also. You will receive everything listed below: - Case Feeder Body fulling assembled - 1 Collator Plate your choice of caliber (Small Pistol/Rifle Large Pistol/Rifle or XL for 338/300 WinMag) - 12VDC Power Supply - Standard Lee 1000 drop tube if ordering the standard case drop tube. Note: - If using Dillon or XL drop tube, you will need to order that from Dillon can be found at these sites: https://www.dillonprecision.com/20533 https://www.dillonprecision.com/11069 Additional Collator Plates can be added to your order, my other listing has the plates